Floor tiles that are easy to contact with water, such as bathrooms, kitchens, stairs, etc., are easy to slip. The convenient anti-skid method is to stick waterproof self-adhesive anti-skid stickers to avoid accidents. However, there are still many people who do not know how to use the anti slip sticker to prevent it from slipping effectively. The following simple steps are described:

Step 1: Please make sure that the anti slip sticker must be stuck on a smooth surface for good effect.

Step 2: Wipe the place where the anti slip sticker is to be stuck, keep it dry and free of dust, sand and oil stains. If there is oil stain, wipe it with detergent or alcohol and keep it dry.

Step 3: Do not immediately remove the backing paper of the anti slip sticker. Before pasting, place the anti slip sticker at the position to be pasted and measure the distance. The scope of anti-skid shall not be too small, and the parts frequently stepped on shall be fully covered. The distance between anti slip stickers should be 5-7cm. Too far is ineffective, and too close wastes materials.

Step 4: Tear off the anti slip backing paper and stick one piece at a time. Be careful not to leave bubbles when pasting. After pasting, press firmly for 3 minutes to make the adhesive fully stick.

Step 5: After the anti slip stickers are fully applied, let them stand for more than 12 hours, and do not move or touch water.

Label: carpet anti slip sticker